beautypg.com

Hdd module hdd connector, Screw b x2 – Elitegroup 259IA3 User Manual v.4 User Manual

Page 4

background image

■

■

■

■ chapter 4 upgrading your computer

4-4

HDD Module

HDD Connector

6.

Locate and remove 4 Screw B’s from the HDD module.

Remove the metal case.

Screw B x2

Screw B x2

7.

Re-attach the metal cover to the new hard drive and

tighten 4 Screw B’s. Note the green PC board of the hard disk

drive is facing against the metal case.

8.

Re-attach the HDD module to the HDD connector.

9.

Place the HDD module back to the HDD bay.

10.

Put the HDD cover back and re-attach Screw A.

See also other documents in the category Elitegroup Notebooks: