Elitegroup M50EI v.2 - Manual (Page 7)

■ chapter 2 bios setup and security feature
2-7
settings in the Power Options Properties (Start > Control Panel > Power Options).
Note: By default, both the Long Battery Life Mode and High Performance Mode
are enabled. In this combination, when the notebook is on AC power, it enters Higher
Performance Mode automatically, and when the notebook is on battery power, it
enters Long Battery Life Mode.
Boot Setup
►Boot Settings Configuration
Item Selections /
Sub-menu Description
Quiet Boot Disabled
Enabled
When Enabled, the system will display
OEM logo instead of the POST
messages.
When Disabled, the system will display
POST messages (i.e. devices
information.)
►Boot Device Priority
Item Selections /
Sub-menu Description
1st Boot
Device Set the type of device for the 1st drive
BIOS attempts to boot from. If Realtek
Boot Agent is selected, system will
attempt to load boot sector from the
Ethernet port.
2nd Boot
Device Set the type of device for the 2nd drive
BIOS attempts to boot from.
3rd Boot
Device
Removable Dev.
CD/DVD
Hard Drive
Realtek Boot
Agent
Disabled
Set the type of device for the 3rd drive
BIOS attempts to boot from.