Elitegroup P53IN v.2 - Manual (Page 5)

■ chapter 2 bios setup and security feature
►Boot Device Priority
Item Selections /
Sub-menu Description
1st Boot
Device Set the type of device for the 1st drive
BIOS attempts to boot from. If Realtek
Boot Agent is selected, the system will
attempt to load the boot sector from the
Ethernet port.
2nd Boot
Device Set the type of device for the 2nd drive
BIOS attempts to boot from.
3rd Boot
Device Set the type of device for the 3rd drive
BIOS attempts to boot from.
4th Boot
Device
Removable Dev.
CD/DVD
Hard Drive
Realtek Boot
Agent
Disabled
Set the type of device for the 4th drive
BIOS attempts to boot from.
Note:
If you select Realtek Boot Agent, the system will attempt to boot from the
network.
Note: When the BIOS performs POST, you may also press the F12 Key to enable
the Boot Device selection menu. You may choose CD/DVD, Hard Drive, or Realtek
Boot Agent as the first storage device to boot from. If you have already connected a
USB Floppy Disk Drive before powering up, it will appear as a Removable Device in
the Boot Device selection menu
2-5