Elitegroup 755II1 v.2 - Manual (Page 7)

■ chapter 2 bios setup and security feature
2-7
►Boot Device Priority
Item Selections /
Sub-menu Description
1st Boot
Device Set the type of device for the 1st drive
BIOS attempts to boot from. If NSC
MacPhyter is selected, system will
attempt to load boot sector from the
Ethernet port.
2nd Boot
Device Set the type of device for the 2nd drive
BIOS attempts to boot from.
3rd Boot
Device Set the type of device for the 3rd drive
BIOS attempts to boot from.
4th Boot
Device
ATAPI CDROM
Hard Drive
NSC DP83815/6
MacPhyter
Disabled
Removable Dev.
Set the type of device for the 4th drive
BIOS attempts to boot from.
Note: If you select NSC DP83815/83816MacPhyter, the system will attempt to
boot from the network.
Note: When the BIOS performs POST, you may also press F12 Key to enable the
Boot Device selection menu. You may choose ATAPI CDROM, Hard Drive, or NSC
MacPhyter as the first storage device to boot from. If you have already connected a
USB Floppy Disk Drive before powering up, it will appear as a Removable Device in
the Boot Device selection menu.