Davey SPAPOWER CLASSIC HEATER User Manual
Page 5
5
Turn the screw clockwise if the
pressure holds heating element
on. Turn anticlockwise if the
pressure is insufficient to operate
the heater.
The above adjustments can only
be done if the pool is below the
thermostat setting.
The ‘O’ ring must be fitted to the
control head against the
retaining edge before fitting
to heater body. Do not rely on
locking ring to pull head and
body together. Use downward
pressure while tightening locking
ring, making sure that locators
engage correctly.
Hand tighten only.
DO NOT assemble heater with
‘O’ ring as shown. This will
dislodge when head and body
are engaged causing water
damage to the electronics.
However, lightly lubricating the
inside of this lip is permissible &
will help assembly.