Asus K8V SE - Manual (Page 47)

ASUS K8V SE Deluxe motherboard 2-25
K8V
®
K8V SE Deluxe
SATA RAID Connectors
GND RSA
T
A_TXP2
RSA
T
A_TXN2
GND RSA
T
A_RXP2
RSA
T
A_RXN2
GND
PRI_SATA
GND RSA
T A_TXP1
RSA
T A_TXN1
GND RSA
T A_RXP1
RSA
T A_RXN1
GND
SEC_SATA
5. RAID Serial ATA connectors (7-pin SEC_SATA, PRI_SATA)
These Serial ATA connectors support SATA hard disks that you may
configure as a RAID set. Through the onboard Promise
® PDC20378
RAID controller, you may create a RAID 0, RAID 1,or RAID 0+1
configuration together with the RAID ATA133 connector. See Chapter 5
for details on RAID configuration.
• If you wish to create a RAID set, make sure that you have
connected the Serial ATA cable and installed Serial ATA devices.
You cannot enter the SATARaid™ utility and SATA BIOS setup
during POST if no Serial ATA device is connected.
• The Promise ® PDC20378 RAID controller does not support ATAPI
devices such as CD-ROMs, DVD-ROMs, etc.
• Refer to section “5.6 Promise ® RAID Configurations” for details on
SATA RAID configuration.