AEG KAM120 User Manual

Page 8

6.6 Pre-selecting the start time,
number of cups and coffee
strength:

Press:
Button

(Figure 2/E)

Button

(Figure 2/D)

Button

(Figure 2/F)

For how to pre-select the number of
cups and coffee strength refer to
Item 6.3 and 6.5.
If, for example, for 8 o’clock in the
morning you want
4 cups, medium strength
then the following will
appear:

The

button (Figure 2/E) concludes

the programming. The time and set-
tings appear again in normal mode. (In
programming mode the saucer flashes
for the coffee strength setting).

7 Making coffee

Once you have made the preparations
described in Item 1 - Item 6 (see above)
there are various options for making
coffee.

7.1 Coffee using ready ground
coffee (Figure 2 and 12)

Pour in water (Item 2), insert filter
paper (Item 3), add ground coffee,
place coffee jug on the warming plate
(Item 4), and finally press button

(Figure 2/B).
The red indicator will come on.
The brewing procedure will start.

7.2 Coffee using ready ground
coffee with pre-programmed
start time (Figure 12 and 2)

Pour in water (Item 2), insert filter
paper (Item 3), add ground coffee,
place coffee jug on the warming plate
(Item 4), and press

buttons. The green power

indicator for the button

will be

illuminated. The brewing procedure
will start automatically at the set time.

At the start time, the green indicator
(Figure 2/K) will go off and the red
indicator next to the button

will

be illuminated (Figure 2/B).
Comment: If, once pre-programmed,
the start time is not to be changed you
need only press the

button to acti-

vate the programme.

7.3 Coffee using the coffee
grinder (Figures 2, 13)

Pour in water (Item 2), insert filter
paper (Item 3), place coffee jug on the
warming plate (Item 4).
Set number of cups using

and cof-

fee strength using

. Select aroma

setting

as required.

Swivel the swivel filter (Figure 13) to
the left until it clicks into place.
Press button

(Figure 2/B). The red

indicator will come on. Once the coffee
has been ground, the filter automati-
cally swivels into the brewing position
and brewing begins.

7.4 Coffee using the coffee
grinder with pre-programmed
start time (Figures 2, 13)

Pour in water (Item 2), insert filter
paper (Item 3), place coffee jug on the
warming plate (Item 4) and press

buttons.

The green indicator for button

(Figure 2/J) will come on. Swivel the
swivel filter (Figure 13) to the left until
it clicks into place.
The grinding and brewing procedure
will start automatically at the set time.
At the start time the green indicator
for button

will go off and the red

indicator (Figure 2/B) will be illumi-
nated. Once the coffee has been
ground, the filter automatically swivels
into the brewing position and brewing
begins.
Comment: If, once pre-programmed,
the start time, number of cups and
coffee strength are not to be changed
you need only press the

button to

activate the programme.