Ameriphone VCO - Manual (Page 20)

Direct Audio Output
The AUDIO OUTPUT socket allows
you to connect the Dialogue VCO to a
hearing aid, neck loop, cochlear implant
or other assistive listening devices.
To use this port, plug in a compatible
auxiliary cable and connect it to your
assistive listening device. Speak into the
handset when you use the Audio Output
connection.
Cochlear Implant Adapter Cord:
A cochlear adapter cord is available
from Ameriphone that can be used to
plug the Dialogue VCO directly into a
speech processor.
WARNING! During thunderstorms, avoid
using telephones, electric shock from
lightning can occur. Before plugging any
cord into your speech processor, you must
consult your implant manufacturer.
Connecting the Speech Processor:
Plug the mono end of the plug into the
speech processor.
Plug the stereo end of the plug into the
Audio Output socket on the phone.
Speak into the handset when using the
Cochlear Implant Adapter Cord.
Connecting to the Dialogue LVD
The Dialogue VCO can be used with
the Dialogue LVD from Ameriphone,
the large visual display for the Q-90
TTY. Attach the Dialogue LVD cable
to the connector on the back of the
Dialogue VCO. Be careful not to
bend any pins.
Special Features
(Continued)
AUDIO
OUTPUT
DIAL
P
Figure 36 - Audio Output
Socket
Figure 37 - Connecting the
Speech Processor
DIALOGUE VCO
M1 a. a. a. a. a.
POWER RELAY REL MGS SPACE AUTO ANS SIGNAL
M2 M3 M4 M5
SELECT MEMORY b
X
HOLD PROG
LO HI
FLASH REDIAL
TONE VOL AMPLIFY
A B C
G H I
T U V
W X Y
P R S
J K L
M N O
D E F
Q Z
! $ () = " / ' + - , . ? : ;
b. b. b. b. b.
18
Figure 38 - Connecting the
Dialogue LVD
PRINTER
TTY/TDD
12 VDC
500 mA
MANUAL AUTO