AT&T 145 User Manual
Page 7
Memory Features
Numbers will remain stored in memory unless you erase or
change them by entering other numbers.
Capacity: This telephone can store up to nine different
phone numbers, each up to 18 digits long.
Speed Dialing: Nine telephone numbers can be stored in
standard speed-dialing locations. You can dial any of these
numbers by pressing two buttons.
NOTE: Numbers programmed into a memory location
might not be retained if the telephone has been unplugged
from the line jack for a half hour or more.
Speed Dialing
To program numbers into memory:
1. Press
.
2. Enter telephone number. You will hear a click when
each button is pressed.
3. Press
.
4. Enter a digit (1-9) for the memory location where the
number is to be stored.
5. Hang up after the number is entered correctly.
Repeat steps 1-5 to store another number.
To dial:
1. Listen for dial tone.
2. Press
.
3. Press memory location (1-9).
Memory Erase
To erase any number from memory, you can enter another
number in the same location.
MEMORY
MEMORY
PROGRAM
MEMORY
6