Bill of materials – ReadyLIFT Ford Raptor 2010-2014 - Mid Travel Off Road Upgrade Kit User Manual
Page 3
www.ReadyLIFT.com - Phone: (800) 549-4620
Installation Instructions 44-2150
3
Bill of Materials
Put the vehicle on level ground and measure the gap between all of the
tires and the fenders.
1.
Lift the vehicle and remove the wheels.
2.
Disconnect the ABS line from the fender liner and unplug.
Disconnect the ABS line from the other two clips as well.
3.
Unbolt the brake calipers and hang out of the way.
4.
Raptor Upper Control Arm Kit
Qty
Upper Control Arms w/ Uniball
2
Upper Control Arm Bushings
8
Bushing Inner Sleeves
4
Top Misalignment Spacer
2
Lower Misalignment Spacer
2
Adapter Pin
2
1.5" Uni-Ball Cap w/ O-Ring
2
1/2" G8 Flat Washer.
2
1/2" AN Washer Steel
2
1/2"-20 G8 C-Lock Nut
4
1/4-28, 90deg Zerk Fitting
4
Grease Tube
2
Raptor Steering Kit
Qty
Tie Rod Tube- Left & Right
2
M18 17-4 Stainless Steering Clevis
2
M18 x 25 Flat Socket Head Clevis Bolt
2
Clevis Sleeve
2
Inner Heim
2
Outer Heim
2
3/4"-16 G5 LH Jam Nut
2
7/8"-14 G5 RH Jam Nut
2
7/8" - 5/8" Misalignment Spacer
4
Steering Pins
2
5/8"-18 G8 C-Lock Nut
2
5/8" G8 Flat Washer
2
1/2" - 20 x 2.5" G8 Bolt
2
1/2" G8 Flat Washer
6
1/2"-20 G8 C-LockNut
4
Raptor Lower Control Arm Kit
Qty
Lower Control Arms w/ Uniball
2
Lower Control Arm Bushings
8
LCA Inner Sleeve 3.944x.725 ID
2
LCA Inner Sleeve 4.535x.725 ID
2
LCA Adapter Pin
2
LCA Upper Mis Spacer
2
LCA Lower Mis Spacer
2
Hex Bolt - M20 x 2.5 - 110mm
2
M20 AN Flat Washer
4
M20 x 2.5 Nyloc
2
9/16"-18 Stover Nut
4
9/16 G8 Flat Washer
2
9/16" AN Washer
2
1/2-20 x .500 Long Button Head
2
9/16-18 STD Nut
2
The Bill of Materials represents the component contents of this kit. All hardware is of the highest grade
and the components are manufactured to exacting specifications for a trouble free installation. Use the
attached torque specifications chart when final tightening of the nut and bolts are done.