ReadyLIFT GMC Sierra 1500 4WD Mid Travel Performance Kit, 2007-2013 - Manual (Page 2)

www.ReadyLIFT.com
Phone (702)410-2300
Installation Instructions (44-3003 & 44-3005)
Pre installation notes and preparations:
The following are necessary in order to complete the installation and pro-
vide adequate provisions for intended off-road use. Take extra precaution
and necessary safety procedures when making any and all modifications
to vehicles being fitted with aftermarket components. Prior to installation
of these components, completely and thoroughly read all the installation
procedures and make sure you are able to safely complete all the steps
and recommendations. For technical assistance or questions regarding
ReadyLIFT Off-Road Series kits call:
1-800-549-4620
Required modifications for safe and proper fitment of ReadyLIFT Off-Road
Series increased travel suspension system(s):

Front track width widened by 2.5” per side

Aftermarket widened front fenders required

Requires removal of OE suspension limiter at frame (cutting required)

Wheels with proper backspacing (Min. 4.5” backspacing required)

Properly sized tire fitment (Max. 35” OD recommended)

Modified or aftermarket front bumper

Modified wheel well openings and firewall area near foot-wells

Relocating parts in/around wheel well areas

Note: OE wheel well liners will not be reused and sheet metal cutting
is required along with removal of OE front fenders.

Note: (Rear only) Cutting of the rear fender wells/bed required to
complete installation of bed cage.