ReadyLIFT Toyota Tundra, 2007-2014 - Heavy Duty Steering Kit - Manual (Page 5)

.
Notes and Maintenance:
Check for misalignment spacer bind. If the heim
body makes contact with the clevis or misalign
spacers, limit straps MUST be installed.
DO NOT LUBE Heim joints , keep clean and dry.
A light layer of WD-40 is acceptable in wet
weather conditions.
Steering rack boots recommended.
www.ReadyLIFT.com
Phone (702)410-2300
Installation Instructions (OFF-Road Series 38-XXXX Steering kits)
Attach and tighten with provided hardware. Install and torque tapered steering pin in spindle
Insert misalignment spacers into lg. heim Slide lg. heim w/spacers onto steering pin and toque
Adjust steering tubes and tighten jam nuts inner & outer Reinstall wheels/tires and check clearance at wheel
Check all work performed, test drive and align vehicle
Pin taper must sit flush/below hole in spindle