ReadyLIFT Toyota Tundra 2 Inch Rear Block Kit: 1999-2014, 2WD & 4WD User Manual
Page 6
66-5001 & 66-5002
2005-UP Toyota Tacoma 2/4WD 6-Lug, 2000-UP Toyota Tundra 2/4WD
Installation Instructions
www.ReadyLIFT.com
Technical Support/Customer Service (702)410 -2300
Final Checks & Adjustments
Post Installation Warnings:
Once the vehicle is lowered to the ground, check all parts which have rubber or urethane compo-
nents to insure proper torque. Torque wheels to factory specs. Move vehicle backwards and forwards a short distance to allow sus-
pension components to adjust. Turn the front wheels completely left then right and verify adequate tire, wheel, brake line, and ABS
wire clearance. Test and inspect steering, brake and suspension components for tightness and proper operation. Inspect brakes
hoses and ABS lines for adequate slack at full extension. Failure to perform the post inspection checks may result in vehicle compo-
nent damage and/or personal injury or death to driver and/or passengers. Test drive vehicle and re-check the torque of all fasteners
and re-torque wheels on vehicle. Re-adjust headlamps.
Vehicle Handling Warning:
Vehicles with larger tires and wheels will handle differently than stock vehicles. Take time to famil-
iarize yourself with the handling of your vehicle.
Wheel Alignment/Headlamp Adjustment:
It is necessary to have a proper and professional wheel alignment performed by a certified alignment technician.
Align the vehicle to factory specifications. It is recommended that your vehicle alignment be checked after any off-
road driving. In addition to your vehicle alignment, for your safety and others, it is necessary to check and adjust your
vehicle headlamps for proper aim and alignment
Vehicle Re-Torque and Safety Inspection:
Upon completion of all services and adjustments performed on your vehicle, and within 50 miles of driving, check to ensure all fasten-
ers and hardware are properly torqued to specification as noted in the vehicles factory service manual or the torque chart included.
NO Fine Print Product Warranty:
This unique product warranty proves our commitment to the quality and reliability of every product that ReadyLIFT
manufacturers. The ReadyLIFT warranty does not include shock absorbers.
The ReadyLIFT product warranty only extends to the original purchaser of any ReadyLIFT product, if it breaks, we will
give you a new part. Warranty does not apply to discontinued products.
Product purchased directly from ReadyLIFT has a 30 day return policy, on uninstalled products, from the date of purchase. Unin-
stalled product returns must be in the original ReadyLIFT packaging. Please call 800-549-4620 to get RGA# for any return. Cus-
tomers are responsible for shipping costs back to ReadyLIFT. Returns without RGA# will be refused.
Contact ReadyLIFT directly about any potentially defective parts prior to removal from vehicle. If the part in question is deemed war-
rantable an RGA# will be assigned and can be returned for repair or replacement. Replacement parts required prior to warranty claim
completion must be purchased. Upon receipt and verification of deemed warranty parts claim, a credit or refund can then be proc-
essed to complete warranty claim transaction.
ReadyLIFT products are NOT intended for off-road abuse. Any abuse or damage as a result from off-road use voids the warranty of
the ReadyLIFT product. Furthermore, ReadyLIFT reserves the right to change, modify or cancel this warranty without prior notice.