beautypg.com

ReadyLIFT Jeep Wrangler JK 2007-2014, 3.0F/2.0"R SST Lift Kit" User Manual

Page 5

background image





www.ReadyLIFT.com

Phone (702)410-2300

Installation Instructions (69-6000)

Slightly lift rear axle and remove upper trac bar bolt.

Next, remove rear upper shock bolts.

Carefully lower rear axle and remove rear coil springs.

Install new upper trac bar bracket with provided hardware.

Install rear bump stop extensions with provided hardware.

Place threaded washer above upper spring mount as shown

Bolt spacer into position by hand using short socket/ext

Note: crush sleeve

Reinstall OE isolator and spring back into vehicle, raise axle

Washer will sit in hole tapered side down