ReadyLIFT Ford F250 Super Duty SST Lift Kit: 2005-2007, 4WD Only - 2.5/2.0"R" - Manual (Page 6)

ReadyLift® (Part# 69-2517CP & 69-2518CP) Installation Instructions
2005-UP Ford F-250 Super Duty 4WD w/Camper Package
ReadyLift®
2060 Placentia Ave Suite B-1, Costa Mesa, CA 92627
T o l l F r e e ( 8 0 0 ) 5 4 9 - 4 6 2 0 L o ca l ( 9 4 9 ) 5 1 5 - 0 7 9 5 F a x ( 9 4 9 )5 1 5 -0 6 5 5
Tire and Wheel Fitment
For 35” tires: 35x12.50 Mounted on a wheel no wider than 9.5” with 0 offset or 5.25”
backspacing.
For 37” tires: 37x12.5 Mounted on the factory wheel or on a wheel no wider than 8” with a +35
offset or 6” backspacing.
Please note that with this fitment the tire will rub a little at full
turn on the radius arm. You will also need to pull the inner fender liner back with both
of these fitments.
The best way to accomplish this is to install the ReadyLift® inner fender liner support kit. Drill
an 1/8” hole on the inner lip of the fender liner and an 1/8” hole on the underside of the body.
Using the self tapping screw and speed clip provided attach the bracket to the fender liner then
attach the other end to the body. See photos below.
Alignment Specs
Toe Left: 1/32
Toe Right: 1/32
Vehicle Handling
Warning
Vehicles with larger
wheels and tires will
handle differently than
stock vehicles. Take
time to familiarize your-
self with the handling of
your vehicle.
DRIVE SAFELY and
WEAR YOUR SEAT-
BELT.
Installation Warning
Always wear proper
safety equipment and
use the correct tools
when installing any
suspension upgrade.
Make sure vehicle is
on a flat surface and
you are using jack
stands or a lift rated
for the weight of the
vehicle.