beautypg.com

Break loose tie rod/upper ball joint no photo – ReadyLIFT Dodge Ram 1500, 2009-2011, 2WD Only - 2.25F/1.5"R SST Lift Kit" User Manual

Page 4

background image

.





Break loose tie rod/upper ball joint

No photo











www.ReadyLIFT.com

Phone (702)410-2300

Installation Instructions (69-1035)

Disconnect tie rod end nut and break loose with hammer

Loosen upper ball joint nut and break loose with hammer.

While supporting suspension, remove upper ball joint nut

Slowly lower suspension and remove coil spring.

Remove upper isolator and replace with new ReadyLIFT hat.

Reinstall coil spring and properly clock in lower control arm.

Carefully lift suspension enough to engage upper ball joint.

Reconnect brake calipers, sway bar end links, and tie rods.