Bill of materials – ReadyLIFT Z-71 GMC Sierra 1500 SST Lift Kit, 2007-2013, 4WD, 2.25F/1.75"R w/ Tubular Control Arms" User Manual
Page 3
www.ReadyLIFT.com - Phone: (800) 549-4620
Installation Instructions 69-3487
3
Revised Feb-2014
Raise the vehicle and support the frame with jack stands.
Remove the wheels and tires.
Remove the front plastic debris plate.
The Bill of Materials represents the component contents of this kit. All hardware is of the highest grade
and the components are manufactured to exacting specifications for a trouble free installation. Use the
attached torque specifications chart when final tightening of the nut and bolts are done.
Bill of Materials
Disconnect the ABS sensor at the frame.
4.
2.
1.
3.
DESCRIPTION
QTY
Aluminum Upper Spacer
2
Aluminum Lower Spacer
2
3" Block And U‐Bolt Kit
1
8" Zip Ties
4
Driver Differential Relocation Bracket
1
Front Differential Skid Plate
1
Grease Pack
1
M10‐1.50x60 Hex Head Bolt
4
M10x30 Thread Cutting Bolt
3
M12 Fender Washer
2
M12 Flange Nut
2
M12 Flat Washer
2
M12 Socket Cap 35mm
1
M12 Socket Cap 45mm
1
M12 Socket Cap 70mm
1
M12 Socket Cap 80mm
1
DESCRIPTION
QTY
M12 Split Lock Washer
4
M12x35 Head Bolt
4
M14 Washers
4
M14‐2.0 C‐Lock Nut (Stover)
2
M14‐2.0x75 Hex Head Bolt
2
M6 Flat Washer
2
M6 Nyloc Nut
2
Passenger Differential Relocation Bracket
1
Rear Shock Extension
2
Steel Crush Sleeve
4
Tubular Upper Control Arm Driver Side
1
Tubular Upper Control Arm Passenger Side
1
Bushing Washer UCA
8
Bushings Half ‐ UCA
8
Upper Ball Joint
2