ReadyLIFT Chevy Silverado 1500 SST Lift Kit, 2007-2013, 4WD, 4.0F/1.75"R w/ Uniball UCAs" - Manual (Page 3)

www.ReadyLIFT.com - Phone: (800) 549-4620
Installation Instructions 69-3486
3
Revised Feb-2014
Raise the vehicle and support the frame with jack stands. Remove the wheels and tires.
Remove the front plastic debris plate.
The Bill of Materials represents the component contents of this kit. All hardware is of the highest grade and the components are
manufactured to exacting specifications for a trouble free installation. Use the attached torque specifications chart when final
tightening of the nut and bolts are done
.
Bill of Materials
Disconnect the ABS sensor at the frame. 4.
2. 1.
3.
DESCRIPTION QTY
1" Cup O‐Ring 2
1" To 5/8" Short Mis Spacer 2
1" To 5/8" Wide Base Spacer 2
1" Uniball F1 Spec 2
1" Uniball Cup Cover 2
1/2" G8 Flat Washer 2
1/2"‐20 G8 Stover Nut 2
1/4" G8 Flat Washer 4
1/4"‐20 X 1" G8 Hex Bolt 2
2007+ Chevy 1500 UCA Pin Steel Arm 2
A‐Arm GM 1500 07‐Up. Left 1
A‐Arm GM 1500 07‐Up. Right 1
Bushing Half 8
Bushing Inner Sleeve 4
Bushing Washer 8
Driver Differential Relocation Bracket 1
Front Differential Skid Plate 1
Grease Tube 1
DESCRIPTION QTY
M10 Flat Washer 8
M10‐1.25 Serrated Flange Nuts 6
M10‐1.50 C‐Lock Nut (Stover) 4
M10‐1.50x60 10.9 Hex Head Bolt 4
M10x30 Thread Cutting Bolt 3
M12 Fender Washer 2
M12 Flange Nut 2
M12 Flat Washer 2
M12 Socket Cap 35mm 1
M12 Socket Cap 45mm 1
M12 Socket Cap 70mm 1
M12 Socket Cap 80mm 1
M12 Split Lock Washer 4
M12x35 Head Bolt 4
Passenger Diff Relocation Bracket 1
Spacer For Abs Line 2
Steel Strut Extension 54mm Tall 2
Uniball Snap Ring. Black 2