ReadyLIFT Z-71 Off Road GMC Sierra 1500 SST Lift Kit, 2014-UP, 4WD, 2.25F/1.75"R w/ Tubular Control Arms" - Manual (Page 11)

www.ReadyLIFT.com - Phone: (800) 549-4620
Installation Instructions 69-3415
11
Revised FEB-2014
Install shock into lower mount and tighten. Once lower mount is tight torque the top shock mount.
Lubricate the ABS line and slide rubber sleeve up to allow the wire to be
re-installed in to frame clip. Re-clip the ABS line back into place.
Reconnect Battery and the installation is complete.
Once the installation is completed we recommend to double check all
work preformed.
* Turn the steering wheel from steer lock to lock to ensure the
steering components are functioning properly and wheels and tires
do not come in contact with control arms or inner fenders.
* Press the brakes several times to ensure the brake system is func-
tioning properly.
* All vehicles must be aligned after any alteration to the vehicles
suspension system.
* Torque wheels to manufactures specifications. Once the vehicle is
on the ground verify tire pressures before the vehicle is driven.
Using the zip ties provided attach the ABS line to the U bolt’s
You may need to bend the upper and lower brake line brackets
to allow enough slack in the line at full droop.
61. 62.
63. 64.
65. 66.
67.