ReadyLIFT 2014-UP GMC Sierra 1500 SST Lift Kit, 4WD & Z71, 4.0F/1.75"R w/ Uniball UCA" User Manual
Page 7
www.ReadyLIFT.com - Phone: (800) 549-4620
Installation Instructions 69-3414
7
Sep-13
Install ReadyLIFT Tubular Control Arm.
Reinstall OEM hardware into is original
location noting original direction of cam bolts
and marks done at when you removed them.
(The plastic OEM Cam locks must be removed
for the vehicle to be aligned properly)
Install strut with spacer leaving nuts loose.
Raise lower control arm to attach strut & torque.
Connect upper control arm to knuckle and torque.
Re-attach the tie rod and torque.
When attaching strut to vehicle be sure to
use provided hardware (serrated flange nuts
on top and self locking nuts with washers on
bottom with M10.9 bolts.)
The OEM lower nut clips and bolts will not be
used. Doing so will cause damage to you ve-
hicle.
Once the lower is tightened, torque the top nuts.
29.
30.
31.
32.
36.
35.
34.
33.