ReadyLIFT GMC Denali 1500 SST Lift Kit, 2000-2006, 2WD & 4WD - 2.5F/1.0"R" User Manual
Page 3
www.ReadyLIFT.com
Phone (702)410-2300
Installation Instructions (69-3005)
Note: This tool/equivalent is required to replace torsion keys
Raise and support vehicle on jack stands at the frame
Locate and remove torsion bar adjusting bolts
Disconnect lower shock hardware.
Install torsion bar loading tool and run torsion key up
Remove torsion key adjusting block from cross-member
Unload torsion key and tool. Then slide torsion bar forward
Note key clocking position.
Torsion key can now be removed
This manual is related to the following products:
- GMC Yukon XL 1500 SST Lift Kit, 2000-2006, 2WD & 4WD - 2.5F/1.0"R" GMC Yukon 1500 SST Lift Kit, 2000-2006, 2WD & 4WD - 2.5F/1.0"R" Chevy Tahoe 1500 SST Lift Kit, 00-06, 2WD/4WD - 2.5F/1.0"R" Chevy Suburban 1500 SST Lift Kit, 00-06, 2WD/4WD - 2.5F/1.0"R" Chevy Avalanche 1500 SST Lift Kit, 00-06, 2WD/4WD - 2.5F/1.0"R"