PreSonus FIREstation User Manual
Page 8
8
[Other]
Serial port:
Select the COM port that is used to connect the computer and mLAN device.
If there is a problem such as failure to read data, check whether this value
matches the COM port you are actually using.
Command Time out Time:
Set the response time that is taken from the issuance of a command to
the mLAN device until the receipt of a response from the device. If the system displays “Serial Tim-
eout Error,” increase this value.
Line space:
Specify the display spacing at which mLAN plugs or mLAN devices are shown on a
page.
Popup menu type:
Select the display method that will be used for popup menus when you connect
a mLAN plug in the Audio or MIDI pages, or when you manually select the Master mLAN device
for a Slave mLAN device in the WCLK page.
For the Audio or MIDI page
If you specify “Normal,” popup menus will be displayed as shown below.
The upper line will extend from the module name to the plug name.
Popup menu type
Audio page