Controls & connections 2 5, 2 back panel basic layout – PreSonus DigiMax LT User Manual
Page 7
Digital Optical Output
An adat™ optical output (lightpipe) is provided on the rear panel of the DigiMAX
LT. Eight simultaneous 24bit outputs are possible when using the optical out.
Word Clock Out/In
The word clock output and input are accessed through separate BNC con-
nectors. The internal sample rate can be set to send 32k, 44.1k, or 48k. The
word clock in scans the incoming information and automatically synchs to the
necessary sample rate.
Insert
Each channel of the DigiMAX LT has an insert that sends and returns the signal
from the associated channel. This insert can be very useful for dynamics
processing (such as compressing, limiting, etc.) or for monitoring purposes by
helping in overcoming the time discrepancy that may be encountered in some
digital recording situations. For more detailed instructions on uses and wiring
of the inserts please see the application guide at the end of the manual. This
insert is wired as follows:
115/230 VAC ~
(by internal
jumpers)
20WATTS
CREATED,
DESIGNED
AND
MANUFACTURED
IN THE USA
POWER
CHANNEL INSERT POINTS
MICROPHONE - XLR
LINE INPUT - TRS
CHANNEL 1
MICROPHONE - XLR
LINE INPUT - TRS
CHANNEL 2
MICROPHONE - XLR
LINE INPUT - TRS
CHANNEL 3
MICROPHONE - XLR
LINE INPUT - TRS
CHANNEL 4
MICROPHONE - XLR
LINE INPUT - TRS
CHANNEL 5
MICROPHONE - XLR
LINE INPUT - TRS
CHANNEL 6
MICROPHONE - XLR
LINE INPUT - TRS
CHANNEL 7
MICROPHONE - XLR
LINE INPUT - TRS
CHANNEL 8
7
5
3
1
8
6
4
2
WORD CLOCK
DIGITAL
AUDIO
OUTPUT
adat™
optical
interface
IN
OUT
2.2 BACK PANEL BASIC LAYOUT
Tip
Ring
Sleeve
Sleeve
Ring
Tip
TIP = Send
RING = Return
SLEEVE = GND
CONTROLS & CONNECTIONS 2
5