Audiovox VE726 - Manual (Page 32)

Problem Solution
Power does not turn on • Check if the power cord is securely plugged into the wall
• Check if the batteries of the remote control unit are not
depleted.
Disc fails to play • Check if the disc is inserted properly into player (Label Side
Up).
• Check if the disc has viewing restriction selected.
• Check if the disc is the proper region code.
• Not all discs are playable in the DVD.
• Check with the beginning part of the manual on whether the
disc is playable.
Camera angles cannot be
changed
• The disc being played does not support ANGLE functions.
• In order to check whether the disc supports the ANGLE
functions, see if the ANGLE indicator on the upper part of the
main display is illuminated.
Subtitles cannot be changed • The disc being played does not support subtitle functions.
• The disc is prohibited from changing subtitle languages.
Vocal languages (AUDIO)
cannot be changed
• The disc being played does not support AUDIO functions.
• The disc is prohibited from changing vocal languages (AUDIO).
No sound output • Check whether the player is in slow or fast playback mode (if
it is case, then just press PLAY button for normal playback)
• Check whether the MUTE function is on.
• If the internal speakers are being used, make sure they are
selected during setup and volume is turned up.
Remote control doesn’t work • Remote too far from the unit.
• Batteries in the remote control are dead.
• Angle of remote to unit too extreme.
Setup menu does not operate • DVD must have a setup menu; if the disc does not have a setup
you will not be able to display a menu.
TV MODE functions do not
work
• Confirm Antenna is connected.
• Confirm Air/Cable setting is correct.
• Confirm that unit is in TV mode.
TROUBLESHOOTING CHECK LIST
31