Overheating conditions, Avoid these overheating conditions – Thermolec Open coil heaters User Manual
Page 4
Filter Frame
Heater too close to fan
Heater too close to filter
Heater too close to elbow
Heater too close to transition
Overheating
Conditions
HEATER
Air
Direction
Minimum recommended distance
for safety and service
Dim. "W"
Dimension "W" + 10"
Obstruction
Type SC or ST
24"
Obstruction
Type FC or FT
Air
Direction
THERMOLEC
HEATER
Warranty
1 - THERMOLEC LTD guarantees it’s heater resistance elements against any defect
in workmanship and material for a period of two years and other built-in components
for a period of one year, starting from the date of shipment from it’s factory.
2 - THERMOLEC LTD will repair or replace without charge, in its factory or in the
field at its own discretion, the heater or part, which upon manufacturer examination, is
considered to be defective.
3 - Misuse of this product, or repairs made by others without THERMOLEC LTD’s
authorization, will void this warranty.
4 - THERMOLEC LTD shall not be held responsible for damage or delay and shall not
be held liable for any charges resulting from the removal or replacement of
the allegedly defective heater.
5 - THERMOLEC LTD shall not be held responsible for any incidental or
consequential damage or delay due to workmanship or material. No additional charge
will be accepted for repair, replacement or modification if prior written authorization
was not obtained from
THERMOLEC LTD.
6 - Any control device or accessory, supplied with the heater, to be mounted or
connected remotely, will only be guaranteed by the manufacturer per conditions stated
in paragraph 5.
Installation of the FLANGED type
FC or FT
Installation of the SLIP-IN type
SC or ST
Heater
Heater
Duct
Duct
Heater too close to a fan
Heater too close to a filter
Filter frame
Heater too close to an elbow
Avoid
these overheating
conditions
Heater too close to a transition
Minimum recommended distance
for safety and service
Obstruction
Obstruction
24”
Type FC or FT
Type SC or ST
Dimension “W” + 10”
Dim. “W”
Universal mounting of Thermolec heaters
Air
Direction
THERMOLEC
HEATER
Air
Direction
THERMOLEC
HEATER
Thermal
cut-out
Thermal
cut-out
Thermal
cut-out