MYDATA MY500 - Manual (Page 2)

SPecificAtion MY500 Jet Printer
dot rAnge
dot rAnge – Solder PASte
Minimum dot diameter (5) 0.33 mm (0.013”)
Maximum dot diameter 0.47 mm (0,019”)
Minimum dot volume (5) 5 nl
Maximum dot volume 15 nl
Single dot volume repeatability (5 nl dots) 12%
Single dot volume repeatability (15 nl dots) 8%
deposit volume repeatability, QfP100c (6) 4,0%
deposit volume repeatability, 0603 (6) 3,5%
Jet Printing SPeed And AccurAcY
Jet Printing SPeed And AccurAcY – Solder PASte
rated speed (cph equivalent) (1) 30 000 cph
reference board throughput (2) 28 000 cph
Single dot repeatability 3 s (X, Y) (3) 54 µm
Single dot accuracy @ cpk=1.33 (X, Y) (3) 80 µm
deposit accuracy @ cpk=1.33 (X, Y) QfP100c (4) 33 µm
deposit accuracy @ cpk=1.33 (X, Y) 0603 (4) 40 µm
deposit repeatability 3 s (X, Y) QfP100c (4) 19 µm
deposit repeatability 3 s (X, Y) 0603 (4) 24 µm
(1) Keeps pace with a P&P machine rated at 30 000 cph. Application dependent.
(2) for reference board information, see page 4.
(3) At default jetting height, 0.65 mm over the PcB.
(4) calculated value from single dot accuracy.
SYSteM feAtureS MY500 Jet Printer
individual deposit programming – optimizing quality for every solder joint
Quick mode programming – automatch
Handling multi-level boards – editable jetting height
Automatic board stretch and board warpage compensation
Bad board mark handling
Automatic verification of paste type and due date
cAd / gerber import, all common formats
on-the-spot revisions
no stencils required
Automatic conveyor width adjustment
low paste waste
closed system for solder paste – clean process
operator independent quality
SYSteM feAtureS
(5) dot diameter and dot volume required for 0.4 mm QfP, 0.5 mm BgA and 0201 components.
(6) calculated value from single dot repeatability.