beautypg.com

En g l is h english – Pfister GT26-4YPY User Manual

Page 6

background image

E

N

G

L

IS

H

ENGLISH

ENGLISH

21

24

22

23

CAUTION: Maintenance

DISASSEMBLY

1. Replacement parts may be available at the store where you purchased

your faucet.

2. When replacement parts are not available, please write or call Price

Pfi ster Consumer Service.

3. Always turn off water and relieve pressure before working on your

faucet.

NOTE: Trim Care

Cleaning Instructions:
For all Handles and decorative fi nishes, use only a soft damp
cloth to clean and shine. Use of polish, detergents, abrasive
cleaners, organic solvents or acid may cause damage. Use of
other than a soft damp cloth will nullify our warranty!
Special Trim:

Trim products which contain Porcelain or other similar
substance are not acceptable for public areas or Commercial
use. Installation of Said Trim is at Users Risk!

1–800–PFAUCET (1–800–732–8238)

For Toll-Free Pfaucet information call
1–800–PFAUCET (1–800–732–8238)
or visit www.pricepfi ster.com

• Installation Support
• Care and Warranty Information

MAINTENANCE AND CARE

21 FLUSHING & AERATOR CLEANING

After installation is complete, remove Aerator Housing (21A). Turn Valve

(21B) on and allow both hot and cold water to run for at least one minute each.

While water is running, check for leaks. To clean the aerator, disassemble Aerator

Housing (21A) by separating the Aerator Shell (21C), Basket (21D), and Washer

(21E). Once parts have been cleaned, reassemble by reversing steps.

22 HANDLE REMOVAL

Using a 3/32” Allen wrench, loosen Set Screw (22A) and remove Handle

(22B).

23 CARTRIDGE REPLACEMENT

Turn off water supplies and relieve pressure before working on your faucet. Remove

handle (see fi gure 22). Remove Dome Cap (23A) by unscrewing counterclockwise.

Using pliers, unscrew Retainer Ring (23B). Carefully remove Cartridge (23C) by

pulling it straight up and out. Reassemble valve by reversing steps.

24 HOSE REMOVAL

To remove hose attachments from Diverter Tee (24F), push on Connection

Fittings (24A & 24B). Holding Plastic Collet (24C) in place, pull out on Connection

Fittings (24A & 24B) until Hoses (24D & 24E) are free.

6

24C

21C

23A

21B

21D

21E

21A

22A

22B

23B

23C

24C

24A

24B

24D

24E

24F

24F

This manual is related to the following products: