beautypg.com

Spa cover lift, Troubleshooting procedures – Alps Electric Tigra XLS User Manual

Page 11

background image

ALPS-Spas 4400 Steve Reynolds Blvd. Norcross, Georgia 30093

770-381-2022 Fax: 770-925-1900 www.ALPS-spas.com

In the event ALPS’s hot tub is not working the way it should, please fi rst review all the
installation and operating instructions in this manual and check the message on the panel
display. If you are still not satisfi ed it is working properly, please follow the appropriate
troubleshooting instructions.

Problem:
Motor is running, but no water is coming out of the jets.

Solution:
This is a common problem that often occurs when the hot tub has
just been fi lled with water. To solve this issue, take a water hose and
spray water into the hole located inside the skimmer. (See Figure
T1). This will supply the pumps with water and prime them.

Figure T1

Spa Tripping Breaker?
- Check wiring connection
- Check if any moisture is inside cabinet especially
in or around Spa Pack.

TROUBLESHOOTING PROCEDURES

WARNING

DO NOT PUT YOUR

HAND INSIDE THE SPA

PACK ELECTRIC SHOCK

MAY OCCUR.

!

Best selling cabinet cover in the world!

Spa Cover Lift

Features:
• 2 Hydraulic pistons for easy one-fi nger lifting
• Automatic locking pistons prevent cover
from falling
• Frames are galvanized and powder coated
for long life

Benefi ts:
• One-person operation to remove cover
• Protects cover from abrasive concrete
and wood deck
• Prolongs life of cover - no more ripped
or torn covers

Spa Cover

not included.

page 11

Log onto www.ALPS-spas.com for more

trouble shooting and online help.

This manual is related to the following products: