ACR Electronics PLB-350B User Manual
Page 5
Y1-03-0241A
4
What country should I register in?
Register your beacon with the PLB national authority of the country for
which the beacon was programmed, typically the country where
purchased,
regardless of where you live or do your adventuring.
The beacon must be reprogrammed if you, as the owner, move out of
the country where the beacon is registered. To verify the country for
which a beacon is programmed, see the label with the UIN (Unique
Identification Number) on the back of the unit. Units that do not have a
country specified on the UIN label are programmed for the United
States.
How do I register?
Registration in the United States
The national authority that accepts registrations in the United States is
the National Oceanic and Atmospheric Administration (NOAA).
There are three ways to register:
1. The fastest and easiest way to register is online at
2. Faxing a registration is also acceptable. Fax the registration form to
the fax number on the top of the registration form.
NOTE: Do not confuse the registration form with the ACR Electronics
warranty card.
3. If online or fax registration is not available, mail the registration form
with the pre-addressed, postage paid envelope to:
Registration NOAA/NESDIS
NSOF, E/SP3
4231 Suitland Road
Suitland, MD 20746
All registration forms will be entered in the 406 MHz beacon registration
database within 48 hours of receipt. The information you provide on the
registration form is used for rescue purposes only.
A confirmation letter, a copy of the actual registration and a proof-of-
registration decal will be mailed to you within two weeks. When you
receive these documents, please check the information carefully,
and then affix the decal to your beacon in the area
marked “BEACON
DECAL HERE.” It is very important that the proof of registration
decal matches the UIN on the beacon. If you do not receive
confirmation back from NOAA within two weeks, call toll free (888) 212-
7283 for assistance.