Nilfisk-ALTO E 130.1 - Manual (Page 8)

8
EN 4.5 Start the machine (when
connected to open con-
tainers (suction mode))
The washer can take in water
from a rain water tank as an
example. The hose for the wa-
ter supply must not be too long,
approx. 5 m.
Make sure that the water tank
is not placed on a lower level
than the machine.
1. Place the other end of the
water hose in the water tank.
Use an external fi lter if the
water contains impurities.
2. Press the start/stop switch
"I".
3. Activate the trigger of the
spray gun and let the water
run, until the air has escaped
from the water hose and the
pump.
4. Mount spray lance and
nozzle.
Højtryk
Lavtryk
High pressure
Low pressure
4.6 Pressure regulation on
the TORNADO ® PR-
nozzle
The pressure can be regulated
on the TORNADO
® PR nozzle.
4.7 Stationary use If mounting a special wall hook
(not standard), the pressure
washer can be used as a sta-
tionary solution meaning that it
can be operated while hanging
on the wall.
Only mount the wall hook on a
sturdy wall. Adjust the length
of the screws and size of rawl-
plugs to the type of wall.
On the wall hook garden/rim
brush (a) foam sprayer (b),
Click & Clean brush (c) and
Click & Clean nozzles (d) can
be stored.
Important: The
bearing capacity
of the wall hook
is max. 30 kg.
A
C B
D