Diagnostic menu, Barcode labels, Barcode function – ADIC 22 User Manual

Page 8

Diagnostic Menu

Your FastStor/FastStor 22 automatically senses the presence of the Barcode Reader at power-up and enables the barcode read
function. The application software can start scanning barcode labels as soon as the FastStor/FastaStor 22 is powered-up. When the
Barcode Reader module is installed, a new

BARCODE

function appears under the FastStor/FastStor 22

DIAGNOSTIC MENU

. The

BARCODE

function is not available if the Barcode Reader module is not installed.

Barcode Function

The

bARCOdE

function, available under the

dIAG MENU

whenever the Barcode Reader module is installed,

is used to

enable/disable the module. If disabled, the barcode reader is not available to the application software.

Note

The

bARCOdE

function default setting is

bCOdE ON

The

dIAG MENU

is accessed by pressing and holding first the

NEXT

button and then the

MODE

button for approximately 5

seconds.

dIAG MENU

will appear on the LCD. The FastStor/FastStor 22 will automatically exit the

dIAG MENU

and return to

LdR

REAdY

if the keypad is idle for 30 seconds.

After entering the

dIAG MENU

, access the Barcode function by pressing the

MODE

button until

bARCOdE

appears on the

LCD.

Press the

SELECT

button.

bCOdE ENAb

will appear on the LCD.

Press the

SELECT

button.

bCOdE ON

will appear on the LCD.

To disable the Barcode Reader module, use the

NEXT

PREVIOUS

keys to select "

bCOdE OFF

". Press the

SELECT

button

to execute the change.

Barcode Labels

After installing the Barcode Reader module, before inserting any data cartridges into your FastStor or FastStor 22, affix the barcode
labels to the cartridges as described:

❐

To install the barcode labels, position the label with the numbers upright, as shown in the illustration below, sliding the label
under the ridges on the sides of the cartridge recess.

Note

Do not peel label from liner. Use perforations to separate labels.

Refer to Chapter 3 of your Installation and Operating Guide to load the media into your FastStor or FastStor 22.

Installing a Barcode Label