Volant RPC1-10.25 - Manual

Give us a problem. Or just drop us a line if you want to know more.
+1 866.8VOLANT / +1 866.886.5268 +1 780.784.7099 [email protected] volantproducts.ca
Document No. 20035 / Revision B Printed in Canada JULY 2013
1 Current crimp jaws shown. Custom crimp jaws are available upon request.
Tool Model: RPC1-10.25
Specification Summary
Base Tool Characteristics
Maximum Working Pressure psi 10,000
Working Crimp Force lbs 1,100,000
Number of Pistons 8
Diametrical Clearance in 10.3
Diametrical Stroke in 1.05
Length of Dies in 5.15
Tool Height without Frame in 21.0
Tool Height with Frame in 29.0
Base Tool Weight lbs 510
Radial Piston Crimping Tool (RPC)
Volant’s RPC is a hydraulically-driven, load-controlled crimping tool used to apply radial load in crimping
and swaging applications. The RPC is portable and built for field applications. The patented split-housing
architecture makes it possible to easily position the crimper anywhere along sections of pipe. With a full one
inch of diametric stroke, the interchangeable crimp jaws accommodate special geometry requirements and
allow variable curvatures and lengths.
Crimp Jaw Diametrical Die Max. Crimp Tool Weight
Part No. 1 Curvature Clearance (lbs)
(in) (in)
82443 7.05 7.89 565
82444 9.13 9.86 535
Radial Piston Crimping Tool (RPC1-10.25)
RPC1-10.25 | PAGE 1