Versa-Matic 2 Elima-Matic Metallic Clamped – ATEX (E2) - Manual (Page 17)

e2mdlCsmATEXC-rev0514
www
.
versamatic
.
com Model E2 Metallic Clamped •
14
Composite Repair Parts List - PTFE Fitted
Notes:
1.) The outer diaphragm plate material is to match the water chamber material (Cast Iron Uses SV221TO)
2.) This metallic seat material is to match the water chamber material. In addition to this seat, (4) o-rings are needed. (Ref Note 3)
3.) These (4) o-rings are only used with metallic fitted seats.
4.) Only Cast Iron uses back-up diaphragm p/n V224TFB-1
5.) V=Aluminum, SV=Stainless Steel, WV=Cast Iron, H =Hastelloy, TC=PTFE Coated, NP=Nickel Plated
6.) On pumps fitted with stainless steel center sections - increase quantity to 4
Air Valve Assembly
Item # Qty. Description
Part Number
Aluminum Stainless Steel Nickel Plated PTFE Coated
1 1 Valve Body (includes items 2-11) 031.V002.156 031.V002.110 031.V002.332 031.V002.309
2 1 Valve Body 095.V001.156 095.V001.110 095.V001.332 095.V001.309
3 1 Valve Body Gasket P24-202
4 1 Valve Sleeve 755.V006.148
5 6 O-ring 560.206.360
6 1 Valve Spool Assembly (Includes items 7) 775.V001.000
7 6 Glyde Ring Assembly P34-204F
8 1 Air Valve Screen P24-210 P34-210 P24-210 P24-210
9 2 End Cap Gasket P24-205
10 2 End Cap P34-300 SP34-300 P34-300TC
11 13 Mounting Screws (8 included on item 1) S1001
Center Section Assembly
Item # Qty. Description
Part Number
Aluminum Stainless Steel Nickel Plated PTFE Coated
12 1 Center Block Assembly (Includes item 13 & 14) P24-400DC ASY SP24-400 P24-401NP P24-401TC
13 2 Bearing Sleeve P31-403
14 2 Main Shaft O-Ring P24-403
15 2 Air Chamber 196.V002.157 196.V002.110 196.V002.332 196.V002.309
16 2 Air Chamber Gasket 360.V001.465
17 8 Bolt P24-110 SP24-110
18 1 Pilot Sleeve Assembly (include item 19) 755.V002.000
19 6 O-ring 560.101.358
20 1 Retaining Ring 675.037.080
21 1 Pilot Spool Assembly (Includes item 22) 775.V002.000
22 8 O-ring 560.023.358
23 1 Muffler 560.033.000
Diaphragm Assembly / Elastomers
Item # Qty. Description
Part Number
PTFE Two-Piece Fusion
24 1 Main Shaft P24-102 P24-103F
25 2 Main Shaft Stud V221F N/A
26 2 Diaphragm V224TF V224F
27 2 Back-Up Diaphragm (See Note 4 Below) V224TFB, V224TFB-1 N/A
28 2 Inner Diaphragm Plate V221TI, SV221TI* (See note 6), V221TINP, V221TITC N/A
29 2* Bumper Washer P24-501* (See note 6)
30 2 Outer Diaphragm Plate (See Note 1 Below) V221TO,SV221TO, HV221TO N/A
31 4 Valve Seat (See Below Material Chart) V240xx
32 4 Valve Seat O-Ring (See Below Material Chart) V240T (See Note 3)
33 4 Valve Ball (See Below Material Chart) V241xx
Wet End Assembly
Item # Qty. Description
Part Number
Aluminum Cast Iron Stainless Steel Hastelloy
34 1 Water Chamber V235 WV235 SV235 HV235
35 2 Large Clamp Assembly V230 SV230
36 1 Discharge Manifold V236 WV236 SV236 HV236
1 Discharge Manifold (BSP Option) V236BSP WV236BSP SV236BSP HV236BSP
37 1 Suction Manifold (Footed Option) V237F WV237F SV237F HV237F
1 Suction Manifold (BSP Footed Option) V237FBSP WV237FBSP SV237FBSP HV237FBSP
38 1 Suction Manifold (Screen Mount Option) V237 N/A N/A N/A
39 1 Screen (Screen Mount Only) V238 N/A N/A N/A
40 3 Bolt (Screen Mount Only) V238A N/A N/A N/A
41 1 Hook Up Cover (Screen Mount Only) V242 N/A N/A N/A
42 4 Small Clamp Assembly V239 SV239
Elastomer Material Specifications
Material "Ball P/N" Seat P/N
PTFE V241TF V240TF
Aluminum N/A V240A (See Note 2 Below)
Carbon Steel N/A V240CS (See Note 2 Below)
Stainless Steel V241SS SV240 (See Note 2 Below)
Hastelloy N/A HV240 (See Note 2 Below)
3: EXP
VIEW