Asus P4S800D-X - Manual (Page 54)

2-26 Chapter 2: BIOS information
2.6.4 Boot Settings Configuration
Quick Boot [Enabled]
Full Screen Logo [Enabled]
Add On ROM Display Mode [Force BIOS]
Bootup Num-Lock [On]
PS/2 Mouse Support [Auto]
Wait for ‘F1’ If Error [Enabled]
Hit ‘DEL’ Message Display [Enabled]
Interrupt 19 Capture [Disabled]
Boot Settings Configuration
Allows BIOS to skip
certain tests while
booting. This will
decrease the time
needed to boot the
system.
2.6.2 Hard Disk Drives
1st Drive [PM-ST320413A]
2nd Drive [SiS 964]
Hard Disk Drives
Specifies the boot
sequence from the
available devices.
1st ~ xxth Drive (Hard disk model number auto detected)
These items specify the hard disk priority sequence from the available hard disk
drives. The number of hard disk drive items that appear on the screen depends on
the the number of hard disk drives installed in the system.
Configuration options: [xxxxx Drive] [Disabled]
2.6.3 Removable Drives
1st Boot Device [1st FLOPPY DRIVE]
2nd Boot Device [ASUS USB Flash Disk]
3rd Boot Device [ASUS USB Flash Disk]
Removable Drives
Specifies the boot
sequence from the
available devices.
A device enclosed in
1st ~ xxth Boot Device [1st Floppy Drive]
These items specify the removable boot device priority sequence from the
available removable boot devices. Configuration options: [xxxxx Drive] [Disabled]
This item appears only when there are removable drives (like a USB flash disk)
plugged in the system.
Quick Boot [Enabled]
Enabling this item allows BIOS to skip some power on self tests (POST) while
booting to decrease the time needed to boot the system. When set to [Disabled],
BIOS performs all the POST items. Configuration options: [Disabled] [Enabled]