Poly-Tex SUN SHADOW shade structure system - Manual (Page 8)

DETAIL A
DETAIL B
DIAGONAL CABLE INSTALLATION
REV: AC 130128
5
INSTRUCTIONS:
1. Remove one 5/16" hex nut and one 5/16" lock washer from the inside of one corner fitting (DETAIL A).
Do not discard.
2. Fasten bracket on non-turnbuckle end of cable assembly to top fitting as shown
in DETAIL A.
3. Adjust turnbuckle to make cable assembly as long as possible.
4. Remove one 5/16" hex nut and one 5/16" lock washer from the inside of the corner fitting on the
opposite side of the 20' x 20' section (DETAIL B).
5. Fasten bracket on turnbuckle end of cable assembly to top fitting as shown in
DETAIL B.
6. Tighten cable assembly with the turnbuckle.
7. DO NOT OVER-TIGHTEN. The cable assembly should be taut, but not pull the corners
toward each other.
HEX NUT NB1872
HEX NUT NB1872
CABLE ASSEMBLY
SH2006
LOCK WASHER 5/16" ZP
NB1862
LOCK WASHER 5/16" ZP NB1862