Poly-Tex KOOL MART - Manual (Page 9)

1. Secure door to jambs using (6) cushion balls (NB1927) and
carriage bolts.
2. Fasten top of door to header using wiggle wire.
To open door, remove cushion balls and place them where they can be
found easily. Roll up door and secure inside bungee balls.
To close door, place grommets over bolt ends on the front of the door
jambs and secure with cushion balls.
CUSHION
BALL
VINYL DOOR
BUNGEE BALL
INSIDE VIEW
SLIDING DOORS
ROLL-UP DOOR
OPEN VIEW
Refer to instructions included with the door latch kit to
assemble latches to the doors.
SNAPPER PIN
NB1925
3/8" WING NUT,
NYLON WASHER
WIGGLE WIRE
VINYL DOOR
VINYL DOOR
GROMMET
CLOSED VIEW