Poly-Tex FB3021 - Manual (Page 5)

FB3028
SIGN HOLDER
(2)
FB3023
POST
(2)
NB1902
1/4" WING NUT
(2)
NB1860
1/4" LOCK WASHER
(2)
NB1818
1/4" x 1 3/4" Long
CARRIAGE BOLT
(2)
BENCH TOPS NOT
SHOWN FOR CLARITY
INSTRUCTIONS:
1. REMOVE BLACK PLASTIC CAPS FROM TOPS OF BENCH ENDS.
2. INSERT SIGN HOLDER POSTS INTO TOPS OF BENCH ENDS AS SHOWN.
3. PLACE ONE SIGN HOLDER INTO POSITION WITH HOLES ON POST. INSERT
CARRIAGE BOLTS.
4. PLACE OPPOSITE SIGN HOLDER OVER BOLTS ON OPPOSITE SIDE OF POSTS.
5. FASTEN WITH LOCK WASHERS AND WING NUTS.
1/4" WING NUT
1/4" LOCK WASHER
1/4" x 1 3/4" Long
CARRIAGE BOLT