Poly-Tex FB3010 - Manual (Page 3)

1. PLACE FLAT STACKER POSTS
INTO FLAT STACKER BASE &
SECURE EACH WITH (2) 5/16" x 3/4"
HEX HEAD BOLTS.
IMPORTANT:
IF YOU HAVE EXTENSIONS, PLACE
THE EXTENSIONS AND BENCH
CARRIERS ONTO BASE BEFORE
INSTALLING "V" BRACKETS. FASTEN
BENCH CARRIERS WITH (1) THUMB
SCREW. (FIGURE 1)
2. INSERT "V" BRACKETS. (FIGURE 2)
3. PLACE BENCH TOPS ONTO "V"
BRACKETS.
4. SECURE BENCH TOPS WITH FLAT
STACKER CLIPS. (FIGURE 3)
"V" BRACKET
FLAT STACKER
POST
BENCH TOP
FLAT STACKER
CLIP
THUMB SCREW
"V" BRACKET
IGURE 3
IGURE 2
IGURE 1
FLAT STACKER
EXTENSION
BENCH
CARRIER
FLAT STACKER
BASE
THUMB
SCREW
ONCE DISPLAY IS IN PLACE, ALL CASTERS
MUST BE LOCKED TO PREVENT MOVEMENT.
THE BRAKE IS ACTIVATED BY ROTATING THE
LEVER FROM THE "OFF" POSITION TO THE
"ON" POSITION.