Poly-Tex BH4000 - Manual (Page 3)

INSTRUCTIONS:
1 INSERT THE STABILIZERS INTO THE PEAKS. MAKE SURE THE SNAP BUTTONS SNAP INTO PLACE.
2 ATTACH BOTH SPREADERS TO THE STABILIZERS WITH NYLON WASHERS AND WING NUTS.
3 ATTACH BASKET PURLINS TO THE SPREADERS WITH NYLON WASHERS AND WING NUTS.
4 ATTACH REMAINING BASKET PURLINS TO PEAKS WITH NYLON WASHERS AND WING NUTS.
5 INSERT THE LEGS WITH CASTERS INTO THE STABILIZERS. MAKE SURE THE SNAP BUTTONS SNAP
INTO PLACE.
1
1
ASSEMBLY INSTRUCTIONS
3
PEAK
BASKET PURLINS
STABILIZER
PEAK
STABILIZER
SPREADER
BASKET PURLINS
LEG WITH CASTER
SPREADER
2
2
3
4
5
ONCE DISPLAY IS IN PLACE,
ALL CASTERS MUST BE LOCKED
TO PREVENT MOVEMENT. THE
BRAKE IS ACTIVATED BY ROTATING
THE LEVER FROM THE "OFF"
POSITION TO THE "ON" POSITION.
FIGURE 1
USE CAUTION
DURING ASSEMBLY
PINCH HAZARD
USE CAUTION
DURING ASSEMBLY
PINCH HAZARD