Poly-Tex NT3001 - Manual (Page 3)

3
1. PLACE 30" LEGS INSIDE THE 24" x 44" (LARGEST)
TABLE TOP AS SHOWN.
2. FASTEN TO TABLE TOP USING CAP SCREWS,
FLAT WASHERS, LOCK WASHERS, AND HEX NUTS.
DO NOT TIGHTEN AT THIS TIME.
3. PLACE 43" (LONGER) LEGS OUTSIDE OF TABLE TOP
AS SHOWN.
4. FASTEN TO TABLE TOP USING CAP SCREWS, FLAT
WASHERS, LOCK WASHERS, AND HEX NUTS.
DO NOT TIGHTEN AT THIS TIME.
5. PLACE UPPER SHELF OVER THE BACK LEGS AND
FASTEN USING HARDWARE PROVIDED.
6. STRAIGHTEN LEGS AND TIGHTEN ALL SCREWS
SECURELY.
30" LEG
CAP SCREW
HEX NUT
LOCK WASHER
FLAT WASHER
SHELF MOUNTS OVER
THE BACK LEGS
BACK LEG MOUNTS
OUTSIDE THE TABLE TOP
7. ASSEMBLE THE 24" x 36" AND 22" x 28" TABLES BY
PLACING THE LEGS INSIDE THE TABLE TOPS AND
FASTENING WITH THE HARDWARE PROVIDED. THE
24" x 36" TABLE TOP USES (4) 25 3/4" LEGS. THE
22" x 28" TABLE TOP USES (4) 21 1/2" LEGS.