Poly-Tex FB6001 - Manual (Page 6)

Contact information
Poly-Tex, Inc. PO Box 458
27725 Danville Ave Castle Rock, MN 55010
Toll free (800) 852-3443 Fax (651) 463-2479
www.poly-tex.com
Limited Warranty
Poly-Tex, Inc. warrants its products to be free from defects in material and workmanship for a period of
(1) year from date of invoice. This warranty is provided to the original purchaser of the product and is
not transferable. Poly-Tex does not warrant parts not manufactured by Poly-Tex, but does assign any
transferable manufacturer or supplier warranties. Should any defect be found, full repair or replacement
will be rendered to the customer at no cost following inspection by a Poly-Tex representative and the
return of the defective product to our Castle Rock, MN factory. Expenses for removal or reinstallation of
defective products will not be covered by the warranty.
POLY-TEX SHALL NOT BE HELD RESPONSIBLE FOR ANY SPECIAL OR CONSEQUENTIAL
DAMAGES, OR FOR ANY DELAY IN PERFORMANCE OF THIS WARRANTY BEYOND OUR
CONTROL. THIS WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES
WHETHER IMPLIED, WRITTEN OR ORAL INCLUDING THE WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
This warranty does not cover damage from customer abuse, misuse, improper installation, customer
modifications, customer negligence in performing normal maintenance, damage resulting from acts of
nature.
Hammer, Pliers
Do not climb, sit on, or use this product as a ladder due to possible injuries.
Do not place or install electrical items on this product. Wet conditions are typical and electrical
shock is possible.
Do not place this product on a slope that exceeds 10 degrees.
If your display does not have casters, do not move this display after product is in place. Damage
to display and injuries may occur.
If your display does have casters, once in place, lock all casters to prevent movement.
To remove loose soil and debris, simply spray the soiled areas with a garden hose.
Prior to storage, all surfaces of this product should be sprayed down with water and allowed to dry
completely.
Store folding frames in a flat postion.