Airlink101 AGSW1600 - Manual (Page 10)

9
Troubleshooting
1. Power LED is not lit
• Check if the power adapter is properly connected to the
power outlet. Make sure the power jack is firmly plugged
into the power socket of the switch.
2. Link/Activity is not lit when connect to 10/100/1000Mbps
device
• Check the power switch of the network device attached to
the switch; make sure it is turned ON.
• Check the network cable; make sure it is properly
connected to the switch and the network device.
• Check the network cable; make sure the UTP cables
comply with the specifications described in Section 2.
Section 4