Poly-Tex FB3020 - Manual (Page 5)

FB2004
CASTER ASSEMBLY
(2)
NB1924
THUMB SCREW
(4)
ONCE DISPLAY IS IN PLACE, ALL CASTERS
MUST BE LOCKED TO PREVENT MOVEMENT.
THE BRAKE IS ACTIVATED BY ROTATING THE
LEVER FROM THE "OFF" POSITION TO THE
"ON" POSITION.
INSTRUCTIONS:
1. ATTACH ADJOINING UNIT'S
STABILIZER AND BENCH END
TO THE EXISTING UNIT'S
BENCH END.
2. SET BENCH TOPS OVER-
LAPPING EXISTING BENCH
TOPS AS SHOWN BELOW.
3. SECURE CLIPS ONLY ON
END UNITS OF MULTIPLE
UNITS JOINED TOGETHER (
).
BENCH TOP
BENCH
TOP
BENCH END
BENCH SUPPORT
EXISTING UNIT
ADJOINING UNIT
STABILIZER
ADJOINING UNIT
BENCH END
EXISTING UNIT
BENCH END
END FRAME LEG
THUMB SCREW
CASTER RAIL
INSTRUCTIONS:
1. SLIDE CASTER RAILS INTO BOTTOM OF END FRAMES.
2. TIGHTEN THUMB SCREWS SECURELY TO LOCK INTO PLACE.