Palram Applications Solar AquaDome ZIP - Manual (Page 14)

Before installing or using the Solar AquaDome ZIP, read the instructions of this manual carefully
and act according to these instructions only.
»
General
•
Solar AquaDome ZIP heats water through efficient and economical use of sun radiation and its solar energy.
During daylight hours, when the Solar AquaDome ZIP is exposed to sun radiation, the black pipe absorbs the radiation through the
transparent dome, that enables maximum entry of sunlight. Consequently, the pipe in this enclosed space warms up and heats the
water inside the pipe. The circulating water flow, enabled by a pump (not included), heat up the water in the pool. The efficiency of the
Solar AquaDome ZIP depends, among other factors, on the level of sun radiation to which it is exposed. More details about this subject
are included in the chapters "Things to Know Before Installation" and "Routine Usage".
•
The use of Solar AquaDome ZIP requires a system that includes a pool, full of water, a pump and a filter.
•
These instructions are based on the assumption that the system is in place and fully operational.
•
Solar AquaDome ZIP is suited for connecting to and using together with popular Splasher Pools systems available in the market.
Different systems operate in different ways and have different system requirements. In any case, act according to the user instructions
of these systems for the pool, the pump and the filter, without causing any injury or damage to the environment or to people.
•
The connectors attached to the heat collector are suitable for connecting to popular pool models in the market, without requiring any
other adapters. Additional adapters may be required for other pool models. For more details on the connection mode,
see the "Installation" chapter.
•
In the event of any problem, please contact the customers service: www.palramapplications.com
Solar AquaDome ZIP MC1 x2 TU1 x1 PLC1 x2
ø1” to
Watch out and take great care! The water in the Solar AquaDome ZIP
and water coming out of it may be very hot!
Careless use may cause burns and injury. Act very cautiously when coming in contact with
water flowing directly out of the Solar AquaDome ZIP. The temperature may be very high
in a system without circulation (e.g., when the pump is switched off). As a precaution,
cover the Solar AquaDome ZIP and hide it from the sun until the water in it cools off.
»
Safety and Warning
•
Do not handle the product when the pump operates. Switch off the pump before any service action or installation.
•
In the event that you have to drain the Solar AquaDome ZIP, avoid contact with the outgoing water flow, which may be very hot and cause burns.
•
Do not allow children to operate the Solar AquaDome ZIP.
•
Do not step, climb or stand on top of the Solar AquaDome ZIP.
•
Do not place any heavy objects on the Solar AquaDome ZIP.
•
Place the heat collector at a distance from the pool, to prevent children from using it as a step or a springboard.
•
Do not allow water to freeze in the Solar AquaDome ZIP.
•
Ensure that the pipe that feeds water into the heat collector and the pipe that comes out of it are not folded or twisted.
•
When you wish to connect more than three products, it is recommended to connect them in parallel and not in a series. (Drawing C)
•
If the incoming water opening into the pool is above the water level, take extra care, the water supplied by the heat collector may be very hot.
•
Maximum permitted water pressure in the Solar AquaDome ZIP is 2 bar.
•
After connecting the system, verify that there are no leaks. In the event of a leak, tighten the joints or add Teflon for sealing.
•
Do not create high pressure inside the heat collector. Always ensure that the pipes are not folded and that the water flow freely through
the system when the pump operates, without blockages and interruptions of any type.
•
Ensure that all the pipes and parts of the system resist hot water and are classified for use with hot water.
•
Do not take any action contrary to the guidelines and cautions applied to the pool, the pump and any other external component of the pool system.
•
This product is solely designated for heating water for swimming pools. Water coming out of the Solar AquaDome ZIP are not suitable for drinking.
•
These instructions and warnings do not cover all the possible hazards. The installer and the user must exercise with discretion.
EN
»
System Requirements
A fully built up pool, full of water.
A system of operational pipes, pump and filter for ingoing and outgoing water to and from the pool.
»
List of Contents:
»
Tools and Equipment Required for Installation (not included)
•
Flat screwdriver