ODL Brisa Retractable Screen Doors - double doors - Manual (Page 3)

SILL TYPE DOOR TYPE
2
Identify your door type
Before you begin installing your new retractable screen door, it is important to
identify your sill and door type. If you have a short sill or an outswing door, you
may need to make some modifications before proceeding to the installation steps.
Flush Sill
Sill is flush with the exterior trim.
Long/Extended Sill
Sill extends past the exterior trim.
Double Inswing
Screen assembly will mount
on outside of the home.
Short Sill
Sill stops short of the exterior trim.
*NOTE: Prior to following
the standard assembly
process, you must first
reconfigure the lock/latch.
Go to page 7 to complete
this modification first.
Double Outswing*
Screen assembly will mount
on inside of the home.
Filler Board
Additional steps may be required
Additional steps required
• A filler board is not needed
when short sills have ground
directly underneath sill.
• A filler board is needed when
short sill sits on top of a step.
• Cut the filler board and place
under the trim so the top of the
filler board is even with the sill.