American Audio Q-Record - Manual (Page 15)

© American Audio ® - www.americanaudio.us - Q Record Instruction Manual Page 15
44
49
48
47
46
45
44. poWer LeD - This LED will indicate whether the power is on or off.
45. recorD seLect knoB - This knob is used to select the channel to record from.
46. recorD start/stop Button - This button is used to start and stop recording to your USB
device.
47. track seLect Buttons -
This button is used to select a track. Tapping this button will forward skip to the next track,
holding down this button will rapidly forward skip through the tracks.
This button is used to select a track. Tapping this button will back skip on track, holding
down this button will rapidly BACk SkIP through the tracks.
48. pLaY/pause Button - Each press of the pLay/paUsE bUttOn (48) causes the operation to
change from play to pause or from pause to play. While in play mode the green play LED will glow,
and while in pause mode the green play LED will flash.
49. usB port - This is the USB port where you can insert a USB stick, USB SD Card reader, or com-
patiable external hard drive for playback.
VerY iMportant: pLease see paGe 7 For DetaiLs
reGarDinG/usinG usB DeVices.
Q RECORD USB PLAYER & RECORDER