AKG Acoustics D 880MS User Manual

Page 2

M i c r o p h o n e s · H e a d p h o n e s · W i r e l e s s M i c r o p h o n e s · W i r e l e s s H e a d p h o n e s · H e a d s e t s

Limited Warranty

AKG Acoustics warrants AKG products against defects in material or workmanship for a period
of two years from the date of original purchase made on or after January 1, 2002, and agrees
to repair or, at our option, replace any defective unit without charge for either parts or labor.
AKG Acoustics grants a three-year warranty covering material and labor for the following
condenser microphones purchased on or after July 1, 2003, including the C 12VR, C414B-ULS,
C 414B-TLII, C 426B, Solidtube; C 4500B-BC; C 4000B; C 3000B; C 451B; C 2000B; C 1000S,
the C 480B and the Ultra-Linear Series capsules (CK 61, CK 62, CK 63, CK 69), the SE 300B

and Blue Line capsules (CK 91, CK 92, CK 93, CK 94, CK 98). This warranty is valid for AKG
products purchased within the United States for the original purchaser only. The purchaser’s Bill
of Sale will serve as proof of sales and warranty validity in the U.S. Shipment of defective items
to AKG for repair will be at the customer’s own risk and expense. AKG will assume the return
shipping cost for all items repaired under warranty.

IMPORTANT: This warranty does not cover damage resulting from accident, misuse or abuse,
lack of reasonable care, the affixing of any attachment not provided with the product, loss of
parts, or connecting the product to any receptacle other than specified.

AKG Acoustics GmbH

Lemböckgasse 21–25, P.O.B. 158, A-1230
Vienna/AUSTRIA
Tel: (43 1) 86 654-0*, Fax: (43 1) 86 654-516
Internet: http://www.akg.com

AKG ACOUSTICS, U.S.

914 Airpark Center Drive
Nashville, TN 37217, U.S.A.
Tel: (615) 620-3800, Fax: (615) 620-3875
Internet: http://www.akgusa.com

The microphone shall be a dynamic type with a supercardioid

pickup pattern. Its sensitivity shall be no less than 2.2 mV/Pa,
and the maximum operating level for 3% THD shall be no less
than 156 dB SPL. The maximum diameter of the microphone
shall be no greater than 2 in. (50 mm), and the microphone length
shall be no greater than 7.13 in. (181 mm). The microphone’s net
weight shall be no greater than 10.2 oz. The microphone shall

have a dent-resistant spring-steel windscreen with an integral
removable/replaceable inner pop filter. The microphone shall
have a switchable modular output section that can be equipped
without a switch, TM40 module that incorporates a silent on/off
switch, or with a UHF wireless module to create a wireless
system that is compatible with the WMS 40 wireless receiver
models. The microphone shall be the AKG D880

(D880

S).

Graphical Data

Architects and Engineers Specifications

DS-D 880

/D 880

S Rev. 2.04

Studer Japan Ltd.
2-43-7, Uehara, Shibuya-ku, Tokyo 151-0064/JAPAN
Tel: (813) 3465-2211, Fax: (813) 3465-2214

Erikson Pro Audio
620 McCaffrey, St-Laurent, Quebec, H4T 1N1, CANADA
Tel: (514) 738-3000, Fax: (514) 737-5069
Internet: www.jam-ind.com/eriksonpro

AKG is constantly improving and modifying its products, therefore,
specifications are subject to change without notice.

2.0 in.

(50 mm)

diameter

7.13 in.

(181 mm)

length