IEI Integration PM-LX-800 v1.10 - Manual (Page 70)

Page 70
IEI® Technology, Corp.
Figure 4-1: SO-DIMM Module Installation
4.3.2 Compact Flash Disk Installation
When appropriately formatted, a CompactFlash disk can serve as a bootable hard drive in
applications where installation space is limited. The CompactFlash card occupies a
secondary IDE channel. Configuration options can be found through the BIOS
configuration utility. Follow the instructions below to connect a CompactFlash disk to the
motherboard.
Step 1:
Step 2:
Turn the PM-LX-800 over so that the CompactFlash socket is facing up.
Gently push the CompactFlash chip into the socket until it clicks into place.
Step 0:
4.3.3 Peripheral Device Connection
Cables provided by IEI that connect peripheral devices to the motherboard are listed in
Table 4-1. Cables not included in the kit must be purchased separately.
Quantity Type
1 ATA33 flat cable
1 KB/MS cable
2 RS232 cable