Ultra Start 450 SERIES - Manual (Page 6)

DRIVER'S DOOR PRIORITY UNLOCK
ACTIVATE TRUNK RELEASE
1 Press then release the Disarm / Unlock button on the remote transmitter.
2 The park lights will flash and the siren will chirp two times.*
3 The driver's doors will unlock and the Starter Disable will deactivate. (optional)
4 The LEDs will stop flashing.
5 Press the Disarm / Unlock Button a second time within 3 seconds and the other
doors will unlock.
1 Press then HOLD the Disarm / Unlock button on the remote.
2 The park lights will flash and the siren will chirp two times.
3 The doors will unlock and the Starter Disable will deactivate. (optional)
4 The LEDs will stop flashing.
5 - Continue to HOLD until siren chirps again and trunk activates
6 - Release Button
NOTES:
- For safety, the trunk release will not active when ignition key is ON.
DISARM SYSTEM / UNLOCK DOORS
1 Press then release the Disarm / Unlock button on the remote.
2 The park lights will flash and the Siren will chirp Two times.*
3 The doors will unlock and the Starter Disable** will deactivate.
4 The LEDs will stop flashing.
NOTES:
- If the alarm was active (siren sounding), the first press of the unlock button will turn off
the siren and the second press will unlock / disarm.
- Siren will chirp 3 times if alarm was triggered while armed. See alarm diagnostics
section of manual for further information
- If system is programmed for silent disarm, siren will not chirp when disarming, park
lights will flash 2 times. Contact installer if you do not want this feature.
- If system is in valet mode, siren will not chirp and park lights will not flash but doors will
unlock. LED will be one SOLID. See Valet / Service Mode section of manual for
further information.
** Optional Feature may require additional parts
PRESS & RELEASE
PRESS TWICE
PRESS & HOLD
1 Press and release the Arm/ Lock button on the remote transmitter.
2 The park lights will flash and the siren/ horn will chirp one time.
3 The doors will lock and the Starter Disable will activate. (optional)
4 The LED will start flashing within five seconds.
5 Once Armed, the alarm can be triggered by the shock sensor (impact to
vehicle), door inputs (opening door / hood), turning on ignition.
NOTES:
- If a door is open or delay dome light is 30 seconds after arming, system with chirp 3
times to indicate door input is bypassed until door is closed or dome light turns off.
- If system is programmed for silent arming, siren will not chirp when arming, but park
lights will still flash.
- If system is in valet mode, doors will lock, but siren will not chirp and lights will not flash.
LED indicator will be on solid.
See Valet / Service Mode in this manual for further information
ARM SYSTEM / LOCK DOORS
PRESS & RELEASE
SYSTEM PROGRAMMING - Menu 1
SYSTEM PROGRAMMING - Menu 1
PAGE 6 PAGE 7
450 SERIES 450 SERIES
OWNER'S MANUAL OWNER'S MANUAL TRANSMITTER FUNCTIONS TRANSMITTER FUNCTIONS