Antec HCG-520 User Manual
Page 5
5
INSTALLATION
Install the PSU into either the top or bottom of your case with the four screws provided. Refer to your
case manual if you are unsure where the power supply should be installed.
Connect the 24-pin main power connector to your motherboard.
Connect the 8-pin or 4+4-pin connector for the CPU. If your motherboard has an 8-pin socket with a
cover on some of the openings, we recommend that you remove the cover and use the 8-pin
connector.
Note: Please also refer to your motherboards manual for any special instructions.
See also other documents in the category Antec Tools:
- TRUEPOWER QUATTRO TPQ-1200 (8 pages)
- Neo HE430 (6 pages)
- PHANTOM 350 (24 pages)
- NEOPOWER 430 (6 pages)
- HCG-750 (7 pages)
- SmartPower 4 Serial-ATA (1 page)
- VP450 (6 pages)
- Basiq 430 (1 page)
- 2.0 (4 pages)
- Sonata Elite (11 pages)
- SOLO UCC 13# 0761345-08500-7 EU (1 page)
- Sonata Designer UCC13# 0761345-08146-7 EC (1 page)
- SMARTPOWER 2.0 (4 pages)
- HCG-400 (7 pages)
- 550 (1 page)
- EARTHWATTS EA-350 (7 pages)
- Veris Fusion Remote Max (5 pages)
- Basiq 550 Plus (1 page)
- Veris Fusion v2 (6 pages)
- UCC 13#: 0761345-77203-7 (1 page)
- TruePower Trio 430 Wat (1 page)
- NSK 1380 (5 pages)
- NSK 4480 (8 pages)
- Basiq BP430 (4 pages)
- 500 (34 pages)
- II (7 pages)
- EA-450 (7 pages)
- EA-380D (6 pages)
- EA-650 (7 pages)
- TruePower Quattro 1000W (1 page)
- EA-380 (4 pages)
- Nine Hundred Two UCC13# 0761345-15920-3 US (1 page)
- HCP-750 (9 pages)
- EARTHWATTS 350 GREEN EA-350 (6 pages)
- HCG M SERIES HCG-620M (8 pages)
- HCG M SERIES HCG-520M (8 pages)
- HCP-1200 (9 pages)
- HCG-620 (7 pages)
- EARTHWATTS 750 (7 pages)
- TRUEPOWER 2.0 (6 pages)
- HCG-900 (7 pages)
- CP-850 (1 page)
- TP-750 Blue (1 page)
- New Solution Series (8 pages)